49
—
6. Assembly of the switchgear at site
Figure 59: Example of UniGear ZS1 12 / 17.5 kV, 40 / 50 kA on foundation frame on concrete floor. Panel with examples of gas duct
including chimneys or pressure relief to the outside.
C Typical panel depth C = 1390 mm – however always consider annotation 2)
1) Minimum dimensions; recommended space 500 mm
2) Dimension must be verified according to documentation of the relevant order
Figure 60: Example of UniGear ZS1 24 kV, 25 kA on foundation frame on concrete floor. Panel with examples of gas duct including
chimneys or pressure relief to the outside.
D Typical panel depth D = 1560 mm – however always consider annotation 2)
1) Minimum dimensions; recommended space 500 mm
2) Dimension must be verified according to documentation of the relevant order
To Next Page
Loading...
