81
—
6. Assembly of the switchgear at site
Figure 124:
1 Connection bar
5 Branch conductor
6 Lid for insulating cover
7 Spacer plate
8 Washer 2 mm
9 Threaded plate
10 Insulating cover
11 Cylinder screw
12 Busbar section
13 Lid holder
14 Washer 3 mm
15 M10 hexagon socket head screw
16 10 mm spring washer
17 Spacer plate, 10 mm thick
Figure 125:
Panels 24 kV - Bar connection to the top-mounted box
Panels 24 kV - Bolted busbar joint for top-mounted box, shown for left-hand busbar end. In
continuous busbars the connection is similar, but without the lid holder and without the spacer plate.
To Next Page
Loading...
