- 120 -
000698AG
7 - Operation
Once the inverter is associated with the domestic wireless
network, the user must switch the tablet/smartphone/PC
to the same wireless network which the inverter is con-
nected.
Once the tablet/smartphone/PC device is switched to the
domestic wireless network a new message will conrm
that the connection is acquired. (the WLAN board auto-
matically disables its access point network with the name
ABB-XX-XX-XX-XX-XX-XX that it is no longer necessary).
The message provides the links corresponding to the IP
Address assigned by the home wireless network router to
the inverter and the “Host Name”: both links can be used
each time you want to access the internal webserver, with
the inverter connected to the home wireless network. Take
note of them.
Click the “Next” button” to complete the setup of “Station
Mode”
To Next Page
Loading...
