LVD-EOMU02U-EN REVB 04/2022
2.2 Power supply connection and requirements
ABB 1SVR427041R0000, CP-D 24/0.42
CAUTION!
Safety Extra Low Voltage (SELV) and Protective Extra Low Voltage (PELV)
2.3 Ethernet interface
Connect your Ethernet interface via the VFD-GATEWAY RJ45 jack
Note: EtherNet cable not included. The network cable must be CAT5 or higher, and type UTP, FTP or STP.
The maximum length for an Ethernet segment on twisted pair media is 100 meters.
The VFD-GATEWAY supports twisted pair as the physical media in a star topology. All twisted pair media between the
Ethernet node and the switch or router must be shorter than 100 meters, including media within patch panels.
LED Color Off On Flashing
-
-
To Next Page
Loading...
