4 Wire COMM ports ............................................................... 30
XFC COMM pinouts ........................................................... 30
XRC COMM pinouts .......................................................... 34
5 Wire I/Os ......................................................................... 36
Analog input (AI) pinouts ................................................... 36
Digital input and output (DI/DO) pinouts ................................ 38
6 Powering the device ........................................................... 41
Super capacitor charging at boot time ................................... 41
Power-on sequence ......................................................... 41
Power with battery and charger .......................................... 42
Connect the battery (dc power) .......................................... 42
Connect the charger ........................................................ 43
Connect the solar panel charger: ......................................... 43
Power with external power supply ....................................... 44
Enable real time clock backup ............................................ 45
7 Local communication with the device ..................................... 46
Set up PCCU for connection ............................................... 46
Establish connection with the XFC or XRC ............................... 47
Change to Expert view ...................................................... 49
8 Configure the basic parameters ............................................. 50
Station parameters .......................................................... 50
Change the default time and date format .............................. 51
9 Initial measurement application setup ..................................... 52
10 Configure communications ................................................... 55
Configure COMM1 ............................................................ 55
Configure COMM2 ............................................................ 58
Configure for network communication ................................... 59
Enable and configure Ethernet ............................................ 60
Enable Wi-Fi .................................................................. 61
Enable Bluetooth ............................................................ 64
11 Configure basic security (recommended) ................................. 68
12 Commission the device ........................................................ 70
Validate the device measurement ........................................ 70
Place the device in service ................................................ 70
Optional volume reset (recommended) .................................. 71
13 Troubleshooting ................................................................. 72
To Next Page
Loading...