ABB X Series G5 - Troubleshooting; LCD Alarm and Status Codes

72 | XSERIES G5 START UP GUIDE | 2106001MNAA
13 Troubleshooting
This section discusses a few potential issues during the initial startup of the
flow computer.
IMPORTANT NOTE: For complete troubleshooting instructions,
refer to the Troubleshooting section of the user manual, see
Additional information
.
LCD visual alarm and status codes
The LCD displays alarm conditions and status codes in the Annunciator
area, see Figure 13-1: XSeriesG5 annunciators
.
IMPORTANT NOTE: Alarms are recorded in the Log period flow
record.
Status codes are not recorded in the Log period flow record.
Figure 13-1: XSeries
G5
annunciators
The following table lists the indicator symbol and description of the status
and alarm codes.
Battery Voltage
14.3 VOLTS
A
D
L
C
L
Annunciators
A1
A2
A7
A8