ABB MEASUREMENT & ANALYTICS | STARTUP GUIDE
XSeries
G5
Flow Computers and
Remote Controllers
XFC
G5
and XRC
G5
Scalable
measurement
control for
production
sy
Introduction
This startup guide provides basic installation and configuration procedures
for the XFC
G5
and XRC
G5
. It is designed for typical installations only,
performed by personnel knowledgeable of:
Flow computers and remote controllers
Local and national codes as they apply to hazardous areas
Communication and electrical wiring
Use this guide in conjunction with other drawings and documentation that
may accompany the product purchase order. Many sites have unique
installation requirements. In these cases, it is important to reference site-
specific documentation.
To Next Page
Need help?
General
