Advant Controller AC 31 / Issued: 01.99 1 – 11 Introduction
3
Products Description Order no.
Displays
TC 50 Display with 2 lines of 20 characters, 7 operator keys, 5 customizable
keys for parameter modifications or process control
IP 65 front plate
128 pages with 6 variables per page
128 help messages + 128 information messages
RS232 connection via the serial interfaces of the basic units
MODBUS
protocol or AC31 programming mode
24 V d.c. power supply
Delivered with connector cable for 40 and 50 series basic units
1SBP260150R1001
TCWIN
Programming software for TC 50 under Windows
NT and 95. Deliv-
ered with connector cable for TC50-PC programming
1SBS260280R1001
TCWIN31
Programming software for TC 50 under Windows
3.11. Delivered
with connector cable for TC50-PC programming
1SBS260281R1001
XTC 08 4-digit BCD display with input/output device housing
powered by the basic unit or remote unit
1SBP260107R1001
Accessories for the CS31
bus
For series 50 and 90 basic units
NCB CS31 system bus amplifier for 500 m
max. 2.000 m with 3 amplifiers possible,
24 V d.c. power supply
FPR 347 1200 R1002
NCBR CS31 bus amplifier for 500 m
max. 2.000 m with 3 amplifiers possible,
with redundancy for parallel, ring or star networks,
24 V d.c. power supply
FPR 347 1300 R1002
Cables
07 SK 50 PC programming cable for 40 and 50 series basic units,
9-pin D-SUB connector to PC
1SBN260200R1001
07 SK 51
MODBUS
/ASCII communication cable for 40 and 50 series basic
units - 9-pin D-SUB connector to PC
1SBN260201R1001
07 SK 52 PC programming cable for 40 and 50 series basic units,
with bare wires/terminal connection to PC
1SBN260202R1001
07 SK 53 PC programming cable for 40 and 50 series basic units,
with bare wires/terminal connection to PC
1SBN260203R1001
07 SK 54 TC 50 cable for 40 and 50 series basic units 1SBN260204R1001
07 SK 55 PC-TC 50 programming cable
9-pin D-SUB connector to PC
1SBN260205R1001
07 SK 57 TC 50 cable for 30 and 90 series basic units 1SBN260207R1001
To Next Page
Loading...
Need help?
General
