8
1
ZENITH ZTS(D) T-SERIES 1600-3000 A & ZTSCT T-SERIES 100-3000 A
3. General operation 37
3.1 Position indication 37
3.1.1 Position indication - R5 37
3.1.2 Position Indication - 63L 38
3.2 Operating of automatic Transfer Switch
Equipment 39
3.2.1 Operation of Automatic Transfer
Switch equipment -R5 40
3.2.2 Operation of Automatic Transfer
Switch equipment -63L 42
4. Navigating HMI menu 45
4.1 Start Menu 45
4.2 Using main menu and setting parameters 47
4.3 Menus and parameters 48
4.4 Analog meters and Measures 61
5. Electronic accessories 63
5.1 Using Ekip Connect -software 64
5.2 Using Ekip Programming -module 65
5.2.1 LED indications 65
5.3 Auxiliary power supply module 66
5.3.1 Electrical characteristics 66
5.3.2 LED indications 66
5.4 Using Ekip Signalling 2K-_ -module 67
5.4.1 Electrical characteristics of Ekip
Signalling 2K-_ -module 67
5.4.2 Access from the display / Ekip
Signalling 2K-_ -module 67
5.4.3 LED indications and inputs/outputs
of Ekip Signalling 2K-_ -module 71
5.5 Using Ekip Com _ -modules 72
5.5.1 Ekip Com Modbus RTU -module 72
5.5.2 Ekip Com Profibus DP -module 75
5.5.3 Ekip Com DeviceNet -module 78
5.5.4 Ekip Com Modbus TCP -module 82
5.5.5 Ekip Com Profinet -module 86
5.5.6 Ekip Com EtherNet/IP -module 89
To Next Page
Loading...
Need help?
General
