• Eddystone (Google)
• Altbeacon
2- The Abeeway geolocation server does not support the position calculation based on BLE beacons.
So, it is up to the application to process them.
4.6.3.5 WIFI/LPGPS or WIFI/GPS
Using these strategies, the tracker can use two location technologies in the same cycle if needed
A WIFI scan result considered as successful (at least three BSSID) triggers a WIFI position message. Otherwise,
the tracker tries immediately the next geolocation technology (GPS or LP- GPS), in the same geolocation
cycle. That way, two geolocation technologies are used (if needed) before sending a given position uplink.
Geoloc_timeout =gps_timeout or agps_timeout depending on the used technology
If geoloc_timeout + wifi_time (8 seconds) is higher than ul_period, geoloc_timeout is adjusted and reduced
to fit the ul_period.
4.6.3.6 Multi technology switching state diagrams
➢ Multimode (WIFI + low power-GPS + GPS) (with reset to WIFI on timeout) strategy:
(geoloc_strategy=5)
To Next Page
Loading...