7.3 Tracking in low power mode (beginning and end of motions only)
Case description:
Long-battery life time. Tracking an asset to get its final location in an indoor/outdoor environment.
Proposed configuration
✓ Operational mode: Start/End tracking.
✓ geoloc_sensor: 9 (WIFI/ A-GPS - WIFI/GPS)
✓ ul_period: 120 (2 minutes)
✓ motion_nb_pos: 2
✓ transmit_strat: 1
Results
At the beginning or at the end of a motion, the device sends its position twice with a period of 2 minutes
7.4 Indoor only position
Case description:
Fast tracking of an asset inside buildings or in dense urban area.
Proposal configuration
✓ Operational mode: Motion tracking
✓ ul_period: 120 (2 minutes)
✓ geoloc_sensor: 0 (WIFI only)
✓ geoloc_method: 0 (WIFI only)
✓ transmit_strat=4
Results
The device sends its position once, every 2 minutes when moving, using WIFI mode only.
Medium power consumption (due to the fast tracking).
7.5 Fixed frequency positioning
Case description:
Asset to be geolocated at regular interval (no matter if moving or not) in an indoor/outdoor environment.
Proposed configurations
Position every 6 hours
✓ Operational mode: Standby
✓ geoloc_method: 4 (WIFI/ A-GPS)
✓ periodic_pos_period: 21600 (6 heures)
✓ transmit_strat=2
Position every 30 minutes
✓ Operational mode: Permanent
✓ ul_period: 1600(30 minutes)
✓ geoloc_sensor: 9 (WIFI/ A-GPS - WIFI/GPS)
✓ transmit_strat=2
To Next Page
Loading...