Introduction
7
Package contents and unpacking
Your eMH1 charging station is delivered with a range of accessory components, which
are necessary for the proper operation of the device. Therefore, please check immedi-
ately after unpacking whether the following components are included:
Component
Quantity Description
eMH1 charging
station
1
Charging station comprising lower housing part, up-
per housing part and cover shield with integrated lock
Instruction Manual 1
Manual for operating the charging station (this docu-
ment)
Key 2 Key for locking the housing cover shield
Drilling template 1 Template for drilling the holes for wall mounting
Should one or more components be missing after unpacking, please contact your lo-
cal distributor immediately: You can find the necessary contact details on page ii
in this manual.
Available accessories
ABL SURSUM sells additional accessories for your eMH1 charging station. For the
EVSE 563, the following components are available:
Designation Model number Quantity
Mounting pole*
For mounting all eMH1 charging stations
with or without bracket
Dimensions: 1600 x 280 x 70 cm
Weight: 2,000 g
STEMH10 1
Mounting plate / bracket
with fixings for all eMH1 charging stations
Weight: 640 g
WHEMH10
1
* does not include the charging station pictured
To Next Page
Loading...