ABL eMH1 WALLBOX - Error Sequence F1: Contactor Failure

40
LED presets
Only green LEDs
Only blue LEDs
Both LEDs
6. ERROR MESSAGES
Sequence F1
The main contactor of the Wallbox does not open
1 Switch the power supply off and
then back on again
2 If the error continues to occur,
take the Wallbox out of oper-
ation permanently. Shutdown:
p. 54
Contact your specialist electrical
contractor to have the error
resolved
The green LED flashes four times
The blue LED is continuously Off
200ms 200ms 200ms 200ms200ms200ms200ms200ms200ms200ms