Need help?Do you have a question about the ABL WALLBOX eMH2 EN and is the answer not in the manual?
General| Charging Power | up to 22 kW |
|---|---|
| Input Voltage | 400 V |
| Input Frequency | 50 Hz |
| Charging Current | up to 32 A |
| Connector Type | Type 2 |
| Protection Class | IP54 |
| Housing Material | Plastic |
| Impact Resistance | IK08 |
| Operating Temperature | -30°C to +50°C |
| Mounting Type | Wall-mounted |
| Type | Wallbox |
Information and documents regarding wallbox and accessories.
General instructions for using the manual and safety symbols.
Crucial safety notices for proper installation and operation.
Guidelines for safe and correct operation of the wallbox.
How to identify the specific model variant of the Wallbox eMH2.
List of items included in the wallbox package.
Optional accessories available for the Wallbox eMH2.
Criteria for selecting a suitable installation location for the wallbox.
Necessary tools and components for the mechanical installation.
Steps for preparing the wall surface for mounting the wallbox.
Procedures for opening the wallbox and fixing it to the prepared site.
Detailed steps for connecting the wallbox to the electrical supply.
How to connect data cables for group installations of wallboxes.
Final steps to connect power and test the wallbox for operation.
Configuration steps for using a Master wallbox as a single charging station.
Configuration steps for using a Slave wallbox independently without a Master.
Step-by-step guide on how to charge an electric vehicle with the wallbox.
Troubleshooting common error codes indicated by LED flash patterns.
Solutions for common issues like non-functioning LEDs or unrecognized vehicles.
Procedure for periodically testing the Residual Current Circuit Breaker.
Steps to safely disconnect and remove the wallbox from operation.
Detailed technical data and specifications for the Wallbox eMH2.
Physical dimensions and weight of the Wallbox eMH2.
Relevant standards and directives applicable to the wallbox.
Recommended data cables for bus interfaces in group installations.
Declaration of conformity and CE mark information for the product.
Information on trademarks and proprietary rights mentioned in the manual.
Glossary of abbreviations and technical terms used in the manual.
Legal information regarding copyright, disclaimers, and limitations of liability.
Instructions on how to dispose of the product and accessories responsibly.
To Next Page
