ABL WALLBOX eMH2 EN User Manual

Introduction to the Wallbox eMH2 – Accessories |
7
Accessories
The following accessories for the Wallbox eMH2 are available separately:
 STEMHX0 / PZ42D-00B01
Anodised aluminium mounting pole for fixing wallboxes using suitable adapter
plates
h = 1,495 mm, b = 150 mm, t = 150 mm
 ADPEMH2 / PZ42D-00C07
Mounting plate for fixing the Wallbox eMH2 to the pole
h = 365 mm, b = 265 mm, t = 3 mm
 LAK32B3 / PZ42D00B04
Type 2 charging cable according to IEC 62196-2, up to 32A 240/415VAC,
3-phase,
length ca. 5m
 LAK32C3 / PZ42D00B05
Type 2 charging cable according to IEC 62196-2, up to 32A 240/415VAC,
3-phase,
length ca. 7.5m
 LAK32D3 / PZ42D00B06
Type 2 charging cable according to IEC 62196-2, up to 32A 240/415VAC,
3-phase,
length ca. 10m
Further information and documents regarding your wallbox and accessories are available at:
https://www.toyota-tech.eu https://www.lexus-tech.eu

ABL WALLBOX eMH2 EN Specifications

General

Brand	ABL
Model	WALLBOX eMH2 EN
Category	Automobile Battery Charger
Language	English