42
LED presets
Only green LEDs
Only blue LEDs
Both LEDs
6. ERROR MESSAGES
Sequence F5
A
The charging cable is not properly plugged in
B
The internal control pilot switch is set to the 0 position
1 Remove the charging con-
nector from the vehicle
1 Open the housing cover
2 Plug the charging connec-
tor back into the vehicle
2 Return the CP switch to
the I position
3 Ensure that the charging
connector sits correctly in
the vehicle socket
The green LED is continuously Off
The blue LED flashes four times.
200ms 200ms 200ms 200ms200ms200ms200ms200ms200ms200ms
A B
• In principle, the
charging procedure is
always terminated by
the electric vehicle, not
by the Wallbox
• The Wallbox indicates
that the charging cable
can be removed from
the vehicle's charging
socket
To Next Page
Loading...
