47
LED presets
Only green LEDs
Only blue LEDs
Both LEDs
6. ERROR MESSAGES
Sequence F9
An overcurrent has been detected
The green LED flashes four times
The blue LED flashes every fourth time
200ms 200ms 200ms 200ms200ms200ms200ms200ms200ms200ms
1 Switch the power supply off and
then back on again
2 If the error continues to occur,
take the Wallbox out of oper-
ation permanently. Shutdown:
p. 54
Contact your specialist electrical
contractor to have the error
resolved
3 If the error continues to occur,
check the vehicle. Contact a
qualified specialist repairer for
this purpose
To Next Page
Loading...
