ABL eMH1 WALLBOX - Error Sequence F11: Contactor Fails to Close

49
LED presets
Only green LEDs
Only blue LEDs
Both LEDs
6. ERROR MESSAGES
Sequence F11
The main contactor does not close
The green LED flashes once
Then the green and blue LEDs alternately flash three times each
200ms 200ms 200ms 200ms200ms200ms200ms200ms200ms200ms
1 The Wallbox automatical-
ly re-initiates the charging
procedure after 60 seconds
and repeats this process for 10
minutes
2 If the error continues to occur,
take the Wallbox out of oper-
ation permanently. Shutdown:
p. 54
Contact your specialist electrical
contractor to have the error
resolved