PROBOIL.2X user & installation guide v1e-2
2.1.2 Parts and contents:
This carton will contain the following parts, please check all are present and free from transportation damage before
commencing installation.
1
PROBOIL.2X boiler unit
Complete with sealing caps
A N/A
1 Mains power cable D ASPT1180-D1
1 ¼” flexible blue inlet pipe (1.5M) E ASPT1180-E1
1 ¼” Inlet pushfit connector F ASPT1180-F1
1
½” Inlet “wingnut” connector
With integral “flat” rubber seal
G ASPT1180-G1
1 Inlet meshed filter seal H ASPT1180-H1
1 Outlet rubber seal I ASPT1180-I1
1 3/8” Outlet “wingnut” connector J ASPT1180-J1
1 Silicone outlet tube (0.75M) K ASPT1180-K1
1
8mm barbed stem x 3/8” male tap
connector
L ASPT1180-L1
1
Installation and user guide
(boiler only, tap supplied
separately) registration card
N/A www.proboil.co.uk
2 Installation screws and plugs M & N ASPT1180-M1