Abov E-PGM Serial - User Manual

Questions and Answers

G
Gregory ChenJul 25, 2025
Why does my Abov Motherboard show a Power Check Vddd or Vpp error?
- R
  Rhonda MartinezJul 25, 2025
  If you see a 'Power Check Vddd' or 'Vpp' error on your Abov Motherboard, it means the VDDD/VPPS voltage supplied was incorrect. This can also happen if the voltage level on the target board dropped too much during on-board programming due to high current consumption, or if the target board is short-circuited during on-board programming.
P
Paul MontoyaAug 2, 2025
What to do if my Abov E-PGM Serial shows 'No device-ID Read-ID' error?
- C
  cjonesAug 2, 2025
  If your Abov Motherboard displays 'No device-ID Read-ID == 00xxxxxxxxxx', the wrong device might be selected, or the VDD/GND or signals are not properly connected. Ensure the correct device is selected.
S
Steven VelezAug 9, 2025
What does 'Fail::Ext.. Power On Remove Ext.. Power' mean on my Abov Motherboard?
- J
  Jessica StephensonAug 9, 2025
  If you encounter a 'Fail::Ext.. Power On Remove Ext.. Power' error with your Abov Motherboard, it means the target board is being supplied with external power during on-board programming. Remove the external power to resolve this issue.
F
fergusonwendyAug 17, 2025
What does 'Verify Fail Addr' mean on Abov Motherboard?
- K
  Kimberly WalshAug 17, 2025
  A 'Verify Fail' error on your Abov Motherboard, such as 'Addr :: 11223344 Data :: 5566 ==>> 7788', indicates a verification failure. This means the data read from the specified address (e.g., 11223344) does not match the expected value. In the example, the expected value was 5566, but the actual value read was 7788.