Abov E-PGM Serial - Chapter 1. Introduction

Introduction
Chapter 1. Introducon
E-PGM+, E-GANG4/6 and E-PGM Serial series are universal programming equipment for the ABOV
Semiconductor’s MCU series, delivering superior performance and reliability. This products line has the
following features:
• Deliver high programming speed for mass manufacturing
• Standalone programming and automated programming
• Support USB (2.0 full-speed) interface with Microsoft Windows
• Built-in protection circuit for the programmer and target device
• Data port inputs are protected against ESD up to 15 kV
• Support single chip programming mode via the device socket (except for E-PGM Serial)
• Support Gang programming mode via four or six device sockets
• Support in-system programming (ISP) as an on-board programmer
• Capacity of internal flash memory for target binary or hexa format data:
– E-PGM+/E-GANG4/6: 1 Mbytes
– E-PGM Serial: 8 Mbytes
• Support programming of both the main code and option areas
Version 1.0.0 Page 5 / 33 E-PGM+ E-GANG4/E-GANG6 E-PGM Serial