Abov E-PGM Serial - Chapter 3. Software and Installation; 3.2. Software Installation Guide

Software
Chapter 3. Soware
3.1 Soware releases
The software and firmware of E-PGM+, E-GANG4/6 and E-PGM Serial can be downloaded from ABOV
Semiconductor’s website. The firmware of individual devices is developed and fully tested by ABOV
Semiconductor, and only certified versions are uploaded to the website.
Additional software updates are provided through a special version development process upon request
by customers. For more information about special version development, please get in touch with our
sales representatives.
E-PGM+, E-GANG4/GANG6 and E-PGM Serial share the same software program. Once one of these
programmers is connected, the software program identifies the programmer model and enumerates the
number of gangs (sockets) available.
3.2 Soware installaon
To install the software, perform the following steps:
1. Visit the ABOV Semiconductor’s website at www.abov.co.kr > Development Tools > Rom
Writer > E-PGM+/E-GANG.
2. Under Downloads, download E-PGM+ USB Driver for 32/64 bit OS and E- PGM+
Software. E-GANG4/6 and E-PGM Serial operate on the same driver and software.
3. Proceed without connecting the programming equipment (E-PGM+, E-GANG4/6, or E-PGM
Serial) to the PC.
4. Unzip Epgm_driver_install_Ver_x.x.zip, and open the created folder.
Version 1.0.0 Page 15 / 33 E-PGM+ E-GANG4/E-GANG6 E-PGM Serial