Software installation
7. After running the exe file, the window below should appear if successful. The installation takes
one to three minutes depending on your PC environment.
• Driver installation is complete when “completed successfully” appears at the
bottom of the CMD window.
8. Connect the programming equipment (E-PGM+, E-GANG4/6, or E-PGM Serial) to the PC, and
turn on the power. The device driver of the connected programmer will be automatically
recognized and appear in Device Manager.
Version 1.0.0 Page 17 / 33 E-PGM+ E-GANG4/E-GANG6 E-PGM Serial
To Next Page
Loading...