Absen AW3.9 - 7 Common Installation Issues; Large Gap between the Panels; The Panel Cannot be Fixed on the Square Tube (Frame); Mask Lifting and LED Lamp Knocking out

Service hotline：400-700-3278
Common installation issues
7.1 Large gap between the panels
1. Check whether the bottom support beam of the panel is level;
2. Check whether the 40*40 square tube (frame) is vertical;
3. Check whether the M10*60 bolt is locked too tight;
7.2 The panel cannot be fixed on the square tube (frame)
1. Check whether the 40*40 square tube is vertical;
2. Check whether the distance between 40*40 square tubes is the same as the width of the
panel, which should be done before installation.
7.3 Mask lifting and LED lamp knocking out
1. Handle the panel gently during transportation;
2. Avoid squeezing between panels during installation;