Absen AW Series - User Manual

Questions and Answers

M
Ms. Sarah Morris DDSAug 16, 2025
What to do if the whole screen is black on my Absen Industrial Monitor?
- K
  Katie MitchellAug 16, 2025
  If the whole screen of your Absen Industrial Monitor is black, first, check if the screen power is on. Then, inspect the DVI or HDMI cable to ensure it's not loose. Also, check if the main data cable is tightly inserted. Verify that the sending card is powered on and the running indicator is flashing. If these steps don't resolve the issue, try connecting the computer to an LCD display to check the video card output, updating the video card driver, or replacing the sending card or computer.
C
Crystal JohnsonAug 18, 2025
Why is my Absen Industrial Monitor screen pixelated?
- L
  Laura MillerAug 19, 2025
  If the whole screen of your Absen Industrial Monitor appears pixelated or blurred, start by checking if the power plug of the receiving card is tightly inserted and that the power cable isn't burnt out. Also, ensure the power supply has an output and check the receiving card's data cable. If the issue persists, try replacing the data cable, sending the rcfg file, upgrading the firmware version of the receiving card, or replacing the receiving card.
A
allenamandaAug 22, 2025
How to fix black modules on Absen Industrial Monitor?
- E
  erobinsonAug 22, 2025
  If some modules on your Absen Industrial Monitor are black, check whether the power plug of the corresponding module is tightly inserted and whether the power cable is burnt out. Also, check whether the switch power supply of the corresponding module has no output and whether the flat cable is malfunctioning. You may need to replace the flat cable, module, or receiving card, or send the rcfg file.
D
Debra KnoxAug 25, 2025
What causes chromatic aberration between modules on Absen Industrial Monitor?
- B
  Brad EdwardsAug 25, 2025
  If you notice chromatic aberration between modules on your Absen Industrial Monitor, check whether the module power plug is plugged tightly. If the issue continues, consider replacing the flat cable, power supply, module, or receiving card.
K
Kent Edwards IIAug 28, 2025
Why do all panels on my Absen Industrial Monitor display the same content?
- T
  Troy ChenAug 28, 2025
  If all panels of your Absen Industrial Monitor display the same content, set the screen connection on the software. Also, check whether the data port is connected to the correct port.
G
gabrielallenAug 31, 2025
What to do if the whole screen of my Absen Digital Signage is black?
- J
  Johnny EspinozaAug 31, 2025
  If the whole Absen Digital Signage screen is black, first ensure the screen power is on. Then, check if the DVI or HDMI cable is loose, and verify the main data cable is tightly inserted. Also, check if the sending card is powered on and its running indicator is flashing. If issues persist, try connecting the computer to an LCD display to check the video card output, updating the video card driver, or replacing the sending card or even the computer.
C
Catherine SmithSep 3, 2025
Why is the whole screen of my Absen Digital Signage pixelated or blurred?
- N
  nicholas18Sep 3, 2025
  If your Absen Digital Signage screen is pixelated or blurred, start by checking the receiving card's power plug and cable for tightness and damage. Ensure the power supply is outputting correctly. Inspect the receiving card's data cable, replacing it if necessary. Try sending the rcfg file and upgrading the receiving card's firmware. As a last resort, consider replacing the receiving card.
E
Ernest OrtizSep 6, 2025
How to fix some black modules on Absen Digital Signage?
- M
  Micheal EstradaSep 6, 2025
  If some modules on your Absen Digital Signage are black, check the power plug of the module to ensure it is tightly inserted. Also, check the power cable for any burn damage. Verify that the switch power supply of the module has output. Inspect the flat cable for malfunctions, replacing it if needed. If problems persist, consider replacing the module or the receiving card. You may also try sending the rcfg file.
D
David AndersonSep 8, 2025
Why is there chromatic aberration between modules on my Absen Digital Signage?
- C
  calvinrogersSep 9, 2025
  If you notice chromatic aberration between modules on your Absen Digital Signage, begin by checking if the module power plug is tightly plugged. If not, try replacing the flat cable, the power supply, the module itself, or the receiving card.
C
Caleb HenrySep 12, 2025
What to do if all panels of my Absen Digital Signage display the same content?
- R
  robert21Sep 12, 2025
  If all panels of your Absen Digital Signage display the same content, configure the screen connection settings in the software. Also, check to ensure the data port is correctly connected.