Absen NX Series User Manual

NX Series Product User Manual
22
2. Install the adjacent cabinets in sequence. Use M8*40mm bolts to fix the left
and right of the cabinets, and then tighten them with an Allen wrench tool. It
supports connection from the front of the cabinet or from the back of the cabinet
(open the back cover of the cabinet).
Note: During the installation process, ensure the flatness of the cabinet
structure splicing.
3. Install the second layer of the cabinet, first use M8*40mm bolts to fix the
upper and lower parts of the cabinet, and then use the Allen wrench tool to
tighten the screws; then use the connecting plate to fix the cabinet and the steel
structure.
Note: During the installation process, ensure the flatness of the cabinet
structure
splicing.

Absen NX Series Specifications

General

Brand	Absen
Model	NX Series
Category	Monitor
Language	English