Absen NX1.5 - User Manual

Questions and Answers

T
Todd JenkinsAug 13, 2025
How to fix some modules not lighting on Absen Monitor?
- K
  Keith WilsonAug 13, 2025
  If some modules on your Absen Monitor aren't lighting up, here are some things to check: * Ensure the power plug of the module is securely inserted. * Inspect the power cable for any signs of burning. * Verify the switch power supply of the module is outputting power. * Check the flat cable for malfunctions; if needed, replace it. * Consider replacing the module or the receiving card. * Try sending the rcfg file.
S
Shannon BrownAug 16, 2025
What to do if the whole screen is not lighting on Absen Monitor?
- T
  tayloraguilarAug 16, 2025
  If your entire Absen Monitor screen isn't lighting up, try these steps: * Make sure the screen power is turned on. * Check that the DVI or HDMI cable is securely connected. * Ensure the main data cable is tightly inserted. * Verify the sending card is powered on and the running indicator is flashing. If these steps don't work: * Try replacing the sending card. * Connect your computer to an LCD display to check the video card output. * Update the video card driver or replace the computer if necessary.
K
Kerry CarpenterAug 20, 2025
What to do if Absen Monitor screen show scramble d image?
- J
  Joel RobinsonAug 20, 2025
  If your Absen Monitor screen is showing a scrambled image, try the following: * Ensure the receiving card's power plug is securely inserted and that the power cable isn't burnt out. * Check that the power supply is outputting power. * Inspect the receiving card's data cable; replace it if necessary. * Try sending the rcfg file. * Consider upgrading the firmware version of the receiving card or replacing the receiving card.
T
trantimothyAug 25, 2025
Why is there chromatic aberration between modules on my Absen NX1.5?
- M
  Michelle ThomasAug 25, 2025
  If your Absen Monitor displays chromatic aberration between modules, take these steps: * Ensure the module power plug is tightly plugged. * Try replacing the flat cable or the power supply. * If the issue persists, consider replacing the module.
M
megan52Aug 27, 2025
How to fix all LED panels displaying the same content on Absen Monitor?
- B
  Brittany RichAug 28, 2025
  If all LED panels on your Absen Monitor are displaying the same content, try these solutions: * Set the screen connection in the software. * Check whether the data port is connected to the correct port.
J
Janet BarajasAug 31, 2025
What to do if no control system detected on Absen NX1.5 Monitor?
- G
  gkhanAug 31, 2025
  If the control system isn't being detected on your Absen Monitor, try these steps: * Check the USB cable and ensure it's properly connected. * Verify if the computer's USB port is working correctly. * Try updating the USB driver. * If the problem persists, try replacing the USB cable or the sending card.
M
Marco RosalesSep 4, 2025
What to do if no multi-function card detected on Absen NX1.5?
- S
  Sheila ByrdSep 4, 2025
  If no multi-function card is detected on your Absen Monitor, consider the following: * Check if the distribution cabinet is in automatic state. * Verify the multi-function card is receiving power; if not, replace its power supply. * Ensure the main data cable is correctly inserted into the appropriate data port. * Check the sending card data port for malfunctions. If these steps don't resolve the issue: * Try re-adding the multi-function card. * Consider replacing the multi-function card or the sending card.
J
Jorge WebbSep 8, 2025
How to fix no full screen display on Absen Monitor?
- C
  Crystal ReevesSep 8, 2025
  To resolve a 'no full screen display' issue on your Absen Monitor, check the following: * Ensure the playback window settings are normal. * Verify the output resolution of the video processor. * Check the output window settings of the video processor.