Abus 17787 - User Manual

Kransysteme
Original operating manual
AN 120076.000_EN 01.03.2016
Operation Instructions
for
ABUS load indication system
LIS – SE
Factory No. _______________________
This document may not be reproduced or given to third parties and its content must not be divulged or used for other purposes without the prior written permission of ABUS. You will be liable to
pay compensation for any breach of this provision. All patent and registered design rights reserved.
These installation, operation and maintenance instructions are intended for use in an English–
speaking country by English–speaking specialist personnel.

Summary

General

Brief Description of System

Overview of the ABUS LIS-SE load indication system and its features.

Functions

Overload Shut-Down

Details the system's overload protection and shut-down mechanisms.

Load Population Recorder (optional)

Explains the optional load population recorder and its recording capabilities.

Components

LIS-SE evaluation unit

Description of the main LIS-SE evaluation unit and its terminals.

Technical Data

Load Indicator SystemLIS-SE

Technical specifications for the LIS-SE system, including power and voltage.

Operation

Digital Operator Terminal

Guide to operating the LIS-SE unit via the digital operator terminal.

Basic Settings

Malfunctions

Causes and Remedies

Troubleshooting guide for error codes and common malfunctions of the LIS-SE.

Activation of LIS control unit

LIS - SE parameter list

Description of LIS - SE parameters

Standard settings

Current measurement modules for GM hoist motors

Abus 17787 Specifications