Abus 17787 - 14 Declaration of Conformity

Page 37AN120076.000_EN
14 Declaration of conformity
under the terms of the machinery directive of Appendix II 1A
We ABUS Kransysteme GmbH
Address Sonnenweg 1
D - 51647 Gummersbach
Authorised person for assembly of the special technical documentation:
Name, function, company designation Michael Müller
Department head of technical documentation
ABUS Kransysteme GmbH
address Sonnenweg 1
D- 51647 Gummersbach
hereby declare, that the product:
Designation
Load indic ator system
Types LIS- SE
in Series production
is in accordance with the european guidlines
2006/42/EG Machines
2014/35/EG Low voltage
2014/30/EG Electromagnetic compatibility
referring to the version in force on the date of issue.
The following harmonized standards were used:
EN 954- 1 Safety of machinery
EN ISO 12100- 1 Safety of machinery, tools and plants
EN ISO 12100- 2 Safety of machinery, Basic concepts, general principles for design
EN 60204 T32 Electrical equipment of machines; requirements for hoists
EN 61000- 6- 4 Electromagnetic compatibility; interference emission
EN 61000- 6- 2 Electromagnetic compatibility; resistance to interferences
and the standards referred to therein.
Technical documentation is completely available.
The operating instructions belonging to it are in the language of the land of users.
Name: Dr. Eckhard Bube
Board of
Management
Gummersbach, 01.03.2016 ___________________________ _________________________
Signature of authorised person Indication for the subscriber
This declaration is in accordance with EN ISO 170050.
The company ABUS Kransysteme GmbH runs a certified quality management s ystem according to DIN EN
ISO9001.