Abus LIS-SE User Manual

Kransysteme
Original operating manual
AN 120076.000_EN 01.03.2016
Operation Instructions
for
ABUS load indication system
LIS – SE
Factory No. _______________________
This document may not be reproduced or given to third parties and its content must not be divulged or used for other purposes without the prior written permission of ABUS. You will be liable to
pay compensation for any breach of this provision. All patent and registered design rights reserved.
These installation, operation and maintenance instructions are intended for use in an English–
speaking country by English–speaking specialist personnel.

Abus LIS-SE Specifications

General

Brand	Abus
Model	LIS-SE
Category	Touch Panel
Language	English

Summary

Operation Instructions

General

System Overview and Usage

Covers system description, intended purpose, and warranty notes.

Unit Replacement

Procedure for replacing a LIS-SE unit, including data transfer.

Functions

Core Functional Features

Details overload shutdown, part-load switch, taring, and load recorder functions.

Advanced Functions and Safety

Covers integrated control, safety functions, and FEM group definitions.

Components

System Components

Describes the LIS-SE unit, current modules, and optional load indicators.

Technical Data

System Specifications

Provides technical data for the LIS-SE system and load indicators.

Operation

Operation and Settings

Covers terminal operation, basic settings, and reading load population recorder.

Installation

Installation Procedures and Diagrams

Details installation requirements, checks, and wiring diagrams.

Malfunctions and Service

Troubleshooting Guide

Lists error codes, causes, remedies, and service contact information.

Activation, Disposal, and Parameters

Parameter List

Overview of LIS-SE parameters, their ranges, designations, and remarks.

LIS-SE Parameter Details

Parameter Access Levels

Explains access to menu levels 1 and 2 for parameter configuration.

Equipment Diagnosis Tests

Relay and Input Tests

Details output relay tests and input tests for system diagnostics.

Standard Settings

Standard Settings Procedure

Step-by-step instructions for configuring standard operating parameters.

Notes

Motor Resistance Measurement

Explains how to measure motor resistance for star and delta circuits.

Current Measurement Modules for GM Hoist Motors

Voltage Range 3 Y (380-415 V / 440-480 V)

Tables listing modules, parameters, and specifications for voltage range 3 Y.

Current Measurement Modules for GM Hoist Motors (Continued)

Voltage Range 5 Y (460-500 V / 550-600 V)

Tables listing modules, parameters, and specifications for voltage range 5 Y.

Current Measurement Modules for GM Hoist Motors (Continued)

Voltage Range 1 Y (300-335 V / 360-400 V)

Tables listing modules, parameters, and specifications for voltage range 1 Y.

Current Measurement Modules for GM Hoist Motors (Continued)

Voltage Range 1 A (175-195 V / 208-230 V)

Tables listing modules, parameters, and specifications for voltage range 1 A.

Declaration of Conformity

Product and Standards Information

Declares conformity with European guidelines and lists harmonized standards used.