Abus LIS-SE User Manual

Page 9AN120076.000_EN
6 Installation
Attention!
Before commissioning the unit, it is essential
to check whether the system has been wired
up in accordance with the attached wiring
diagrams.
The ABUS LIS–SE must only be installed by qualified
electricians
If the LIS–SE is retrofitted to an existing crane, inspec -
tion by an independent inspector may be necessary
(see BGV D6, Section 25).
6.1 Housing and wiring diagrams
The dimensions required for the installation of the
LIS–SE are given in Figur 1.

Abus LIS-SE Specifications

General

Brand	Abus
Model	LIS-SE
Category	Touch Panel
Language	English