Abus LIS-SE User Manual

Contents
Page 2 Data : 01.03.2016
1 General 3...................
1.1 Brief Description of System 3........
1.2 Use for t he Intended Purpose 3......
1.3 Notes on warranty 3................
1.4 Replacement of unit 3..............
2 Functions 3.................
2.1 Overload Shut–Down 4.............
2.2 Part–Load Switch 4.................
2.3 Taring 4...........................
2.4 Load Population Recorder (optional) 4
2.4.1 FEM Groups 4.....................
2.4.2 Definitions 5.......................
2.5 Integrated Control Functions 5.......
2.6 Safety Functions 6.................
3 Components 6..............
3.1 LIS–SE evaluation unit 6............
3.2 Current Measurement Module 6.....
3.3 Load indicator (Optional) 6..........
3.3.1 Function of load indicator 7..........
4TechnicalData 7............
4.1 Load Indicator SystemLIS–SE 7......
4.2 LAZ / GLZ Load Indicator 7..........
5Operation 8.................
5.1 Digital Operator Terminal 8..........
5.2 Basic Settings 8...................
5.3 Reading the Load
Population Recorder 8..............
6 Installation 9................
6.1 Housing and wiring diagrams 9......
6.2 Regulations 13......................
7 Malfunctions 13..............
7.1 Causes and Remedies 13............
7.2 Service 13..........................
8 Activation of LIS control unit 14
9Disposal 14..................
10 LIS – SE parameter list 14.....
11 Description of
LIS – SE parameters 15.......
12 Standard settings 22..........
13 Current measurement
modules for
GM hoist motors 27...........
14 Declaration
of conformity 37..............

Abus LIS-SE Specifications

General

Brand	Abus
Model	LIS-SE
Category	Touch Panel
Language	English