– 24 – – 25 –
Aer charging, remember
to properly close the cap
again!
The cap seals the device
and protects the electronics
from humidity and dirt.
USB-C
Attention
While charging the device, install
the Smart X app (from chapter 4).
Charge the battery to 100% (the
charge level of the battery can be
displayed in the app), and the lock
will be ready for use.
3.3
3.4
4.
SmartX
- Download the ABUS Smart X app, install it and follow the
instructions in the app until you have scanned the QR code
on the ABUS code card provided.
- It is imperative to keep the code card in a safe place even
aer completing the setup. You need the code card for so-
ware updates, if you lose your smartphone, and for proof of
ownership for matters related to warranty claims and repair.
Do not give the card to third parties.
- Bluetooth
®
must be switched on in your smartphone to
operate the lock electronics. The smartphone must be
connected to a network and not be in ight mode.
Smart X App