– 28 – – 29 –
1. Smartphone with functioning SmartX app in range
(approx. 2-5 m)
2. Actuate (and hold) the slide switch
3. Lock automatically unlocks, conrmed by tone sequence
4. Remove the shackle (within 10 seconds)
If, while in transport mode, there is no authorised smartphone
in the vicinity or the Bluetooth
®
function is deactivated when
the slide switch is activated, the lock remains closed.
In monitoring mode, this event would trigger the alarm when
movement occurs.
5.2
Opening the lock
5.4
Alarm triggering
If lock movement is detected in monitoring mode and the
authorised smartphone is not in range, a pre-alarm will
sound.
If strong movement is still detected aerwards, the main
alarm will trigger (15-second duration). The process
repeats if movement continues.
5x
1. Insert the shackle into the lock body
2. Lock automatically closes, conrmed by tone sequence
3. Transport mode is activated aer 5 seconds, conrmed through a
signal tone (deep tones)
4. In order to activate monitoring mode, the slide switch must be
actuated (and held) within 5 seconds of inserting the shackle,
conrmed with a signal tone (high tones)
5.3
Closing the lock
5 Sec.