Abus CO alarm User Manual

Displays and functions
32
Display of maximum value
If carbon monoxide is detected in your presence (values of more than 30°
ppm), but the CO alarm has reset into the Normal mode because CO levels
are no longer present, the device stores the peak CO value detected.
Pressing the Test/Reset button displays the stored value for 5 seconds. When
the Test/Reset button is released, the CO alarm returns to the Normal state.
Press the Test/Reset button for 5 seconds to delete the stored value. When
the batteries are changed, the value is automatically deleted and
automatically overwritten when an alarm is triggered.

Abus CO alarm Specifications

General

Brand	Abus
Model	CO alarm
Category	Security System
Language	English