Abus CO alarm User Manual

Displays and functions
35
Alarm state
If a critical amount of CO is detected in the
room, the measured CO concentration is
shown in the display and the alarm outputs
the following signals:
4 short beeps
|| 5 s pause ||
4 short beeps
After 4 minutes, the alarm signal changes
as follows:
4 short beeps
|| 60 s pause ||
4 short beeps
Every beep is accompanied by blinking of
the red ALARM LED. The alarm beeps as
long as there is CO in the air. If the
concentration falls below the critical
threshold, the alarm goes silent and the
device returns to the Normal state.
[4 min]
[CO]
1 x = 1 x ALARM
[5s]
[60s]

Abus CO alarm Specifications

General

Brand	Abus
Model	CO alarm
Category	Security System
Language	English