Abus SHBW10000 - Page 13

13
English
102 4
Humidity report
Time
7200
The interval time of the humidity report.
The value 0 disables the report.
 Adjustable from 0 - 2678400 in seconds
The value is always rounded up to the full
minute. (e.g. 62 seconds -> value is rounded up
to 120 seconds)
(Hexadecimal: 0x00 – 0x28DE80)
103 4
Brightness
report
Time
7200
The interval time of the brightness report.
The value 0 disables the report.
 Adjustable from 0 - 2678400 in seconds
The value is always rounded up to the full
minute. (e.g. 62 seconds -> value is rounded up
to 120 seconds)
(Hexadecimal: 0x00 – 0x28DE80)
104 4
Battery report
Time
86400
The interval time of the battery report.
The value 0 disables the report.
 Adjustable from 0 - 2678400 in seconds
The value is always rounded up to the full
minute. (e.g. 62 seconds -> value is rounded up
to 120 seconds)
(Hexadecimal: 0x00 – 0x28DE80)
110 1
Enable/Disable
Report 111-114
0
Enable or disable reports 111-114.
 0 = Reports are disabled
 1 = Reports are enabled
(Hexadecimal: 0x00 – 0x01)
111 2
Temperature
report
Threshold
10
The threshold value serves as an additional
condition for the time-based report.
If the threshold value was not exceeded, the
time-based report is not sent.
 Adjustable from 1 - 500 in 0,1°.
(e.g. 25 = 2.5°)
(Hexadecimal: 0x01 – 0x1F4)
112 1
Humidity
report
Threshold
5
The threshold value serves as an additional
condition for the time-based report.
If the threshold value was not exceeded, the
time-based report is not sent.
 Adjustable from 1 - 32 in percent
(Hexadecimal: 0x01 – 0x20)