14
113 2
Brightness
report
Threshold
150
The threshold value serves as an additional
condition for the time-based report.
If the threshold value was not exceeded, the
time-based report is not sent.
Adjustable from 1 - 65528 in Lux
(Hexadecimal: 0x01 – 0xFFF8)
114 1
Battery
report
Threshold
10
The threshold value serves as an additional
condition for the time-based report.
If the threshold value was not exceeded, the
time-based report is not sent.
Adjustable from 1 - 100 in percent
(Hexadecimal: 0x01 – 0x64)
3.3. Command Classes
Supported:
1. Association Group Information V1
2. Association V2
3. Battery V1
4. Configuration V1
5. Device Reset Local V1
6. Firmware Update MD V4
7. Manufacturer Specific V2
8. Notification V8
9. Power level
10. Security S2
11. Security V1
12. Sensor Multilevel V5
13. Supervision
14. Transport Service V2
15. Version V2
16. Wake-Up V2
17. Z-Wave Plus Info V2
Controlled:
1. Basic V1
To Next Page
Loading...
