Need help?Do you have a question about the AC Infinity ADVANCE GROW and is the answer not in the manual?
General| Controller Type | Digital |
|---|---|
| Programmability | Yes |
| Voltage | 120V |
| Controller | Included |
| Fan Size | 6 inch |
| Airflow | 205 CFM |
| Noise | 32 dBA |
| Type | Inline Fan |
| Noise Level | 32 dBA (6") |
| Duct Size | 6 inches |
| Dimensions | Varies by fan size |
| Weight | Varies by fan size |
AC Infinity's vision to bring commercial automation technology to home growing, culminating in a four-year development process.
Essential guidelines to reduce risks of fire, electric shock, or injury, covering power, installation, hazardous locations, and operation.
Visual introduction to the main components of the Advance Grow System, including tent, controller, fan, and light.
Comprehensive list of components included in each Advance Grow Tent Kit model, detailing quantities and specifications.
A visual guide outlining the essential steps for assembling the grow system components, from tent to fan and light.
Instructions on mounting the controller, connecting fans, lights, and other devices, and plugging into power outlets.
Visual representation of the CLOUDLAB Advance Grow Tent, a core component of the indoor plant kit.
Lists the specific parts included for the CLOUDLAB Grow Tent, such as poles, plates, screws, and straps.
Details the specific frame poles (A, B, C, D, E, F) included with different CLOUDLAB models like 422, 722, 642, 733, and 844.
Step-by-step instructions for assembling the tent's two base structures using poles and corner pieces.
Guides on unzipping the tent walls and placing the assembled Base One into the tent floor, aligning corners.
Instructions for connecting Base Two poles to Base One to form the complete frame and pulling the roof over it.
Details on closing tent walls with zippers and using Velcro straps to hold the window open.
Instructions for adding roof support beams, inserting the spill pool, and securing Velcro straps.
Steps for magnetically mounting the controller onto its bracket and sliding the assembly into tent straps.
Routing inline duct fan power, connecting the probe to the controller through the opening.
Describes the steel plate for mounting AC Infinity controllers and routing wires through tent flaps, mentioning hidden magnets.
Guidance on positioning the inline fan as exhaust and intake, and hanging the grow light using clip hangers.
Explores different setups for fan and filter placement inside or outside the tent for optimal airflow and noise dampening.
Introduces the CLOUDLINE LITE mixed-flow inline fan system, a component for air circulation.
Details the components included with the CLOUDLINE LITE inline fan across different grow tent kits.
Steps for unscrewing bolts and removing the motor box and wind circle from the fan for installation.
Instructions on using the flange bracket to mark mounting locations and drilling holes into a structurally sound surface.
Guidance on inserting wall anchors and screwing the flange bracket into place using wood screws.
Steps for placing the wind circle back and sliding the motor box onto the bracket, securing it with bolts.
Instructions for securing duct clamps and plugging the fan's power cord into an AC outlet and controller.
Detailed steps for looping straps around the fan bracket and pole, and slipping them through ladder lock slots.
Instructions on routing straps into outer ladder lock slots, adjusting length, and tucking loose ends.
Guides for hanging the fan downward or upward by the poles and securing it by duct flanges.
Instructions on unscrewing the motor cap, rotating it to the desired orientation, and reapplying screws.
Guidance on positioning the inline fan as exhaust and intake, and hanging the grow light using clip hangers.
Steps for removing the motor box and cleaning the impeller and fan blades with a damp cloth, then cleaning stator blades.
Introduces the premium Australian charcoal duct carbon filter for air purification in grow environments.
Details the components included with the carbon filter, such as the filter itself, prefilter cloth, and hanging straps.
Instructions for applying prefilter cloth, connecting ducting, direct fan connection, and positioning in humid spaces.
Steps for securing the filter with hanging straps, adjusting and locking them, and connecting to ductwork.
Guidance on interior hanging for intake and exterior mounting for exhaust applications, and setup for oversized grow spaces.
Procedures for extending filter lifespan by reversing flanges and washing the prefilter cloth.
Introduces the IONBOARD system, an LED grow light designed for indoor plant cultivation.
Details the components included with the IONBOARD grow light across different grow tent kits, including hooks and cords.
Instructions for hanging the grow light using steel hooks over support beams and inserting ends into slotted holes.
Steps for inserting steel hooks into the grow light and positioning tent poles under them for installation.
Instructions for inserting steel hooks into the grow light and looping rope clip hangers around support beams.
Steps for plugging the grow light into a power outlet and connecting it to an external controller via a driver cord.
Charts providing suggested mounting heights and light intensities for seeding, vegetative, and flowering stages.
Explains how to use the knob for OFF/ON mode and adjust light intensity levels in 20% increments.
Introduces the CLOUDRAY circulation fan system, designed for air movement within grow spaces.
Details the components included with the CLOUDRAY circulation fan across different grow tent kits, including zip ties and controller cords.
Instructions for assembling the fan grip clip and mounting the fan to a pole or post, including powering and cable management.
Explains how to cycle through fan speeds (0-10) using a button and how to power the fan on/off by holding the button.
Introduces the CONTROLLER 69, a UIS multi-device controller for managing multiple grow devices.
Details the components included with the CONTROLLER 69, such as the controller itself, zip ties, and sensor probes.
Instructions for connecting UIS connectors, sensor probe, powering devices, and cable management.
Describes wall mounting, magnet mounting, plate mounting, cord arrangement, and kickstand setup.
Explains how the system allows connecting and programming multiple devices simultaneously via controller or app.
Information on Molex adapters, UIS controller cords, and expansion dongles for connecting various devices.
Guides on using dongles to connect multiple devices, including primary device recognition and chain extension.
Details the functions of the controller's buttons and display elements for navigating and operating the device.
Explains OFF/ON modes, AUTO mode triggers (temp/humidity), and timer/cycle/schedule functions for device automation.
Covers display brightness, unit conversions, clock setting, sensor calibration, and transition thresholds for AUTO mode.
Guides on downloading the AC Infinity app from app stores and accessing it via QR code for controller management.
Steps to begin pairing a smart device by tapping the '+' tab and selecting 'Smart Controllers' in the app.
Instructions on selecting CONTROLLER 69 in the app and activating Bluetooth on the controller by holding the port button.
Steps for tapping DONE to complete pairing and viewing the controller's unique ID and connection status in the app.
Answers common questions about compatible devices, definition of 'level', and troubleshooting common issues like devices not turning off.
Addresses questions about connecting different fan sizes, using own fans, setting retention, and resolving app pairing problems.
Details the two-year warranty period, coverage for defects, exclusions like misuse, and contact information for support.
To Next Page
