Need help?Do you have a question about the AC Infinity AI-CLT4 and is the answer not in the manual?
Instructions for initial disassembly and removal of fan components.
Marking mounting holes and drilling for secure fan placement.
Inserting wall anchors and securing the flange bracket with screws.
Reattaching wind circle and motor box, ensuring correct airflow direction.
Securing the fan and attaching ducting with clamps for a tight seal.
Looping the strap and threading it through the ladder lock slot.
Routing the strap into the outer lock slot and securing the loop.
Methods for hanging the fan in different orientations using straps.
Using rope hangers and carabiners for fan installation.
Steps to rotate the motor cap for desired orientation without voiding warranty.
Guidance on positioning the fan as intake or exhaust for optimal ventilation.
Connecting fan to controller and powering via wall outlet.
Connecting T-Series device and sensor probe to the controller.
Using accessories for organizing and managing power cords.
Steps to wall mount the S-Series controller.
Mounting options for S-Series controller using magnet or plate.
Steps to wall mount the T-Series controller.
Mounting options for T-Series controller using magnet or plate.
Instructions for initial disassembly and removal of fan components.
Marking mounting holes and drilling for secure fan placement.
Inserting wall anchors and securing the flange bracket with screws.
Reattaching wind circle and motor box, ensuring correct airflow direction.
Securing the fan and attaching ducting with clamps for a tight seal.
Looping the strap and threading it through the ladder lock slot.
Routing the strap into the outer lock slot and securing the loop.
Methods for hanging the fan in different orientations using straps.
Using rope hangers and carabiners for fan installation.
Steps to rotate the motor cap for desired orientation without voiding warranty.
Guidance on positioning the fan as intake or exhaust for optimal ventilation.
Connecting fan to controller and powering via wall outlet.
Connecting T-Series device and sensor probe to the controller.
Using accessories for organizing and managing power cords.
Steps to wall mount the S-Series controller.
Mounting options for S-Series controller using magnet or plate.
Steps to wall mount the T-Series controller.
Mounting options for T-Series controller using magnet or plate.
General| Model Number | AI-CLT4 |
|---|---|
| Size | 4 inch |
| Speed Settings | 3 |
| Voltage | 12V DC |
| Material | Plastic |
| Mounting | Clip-on |
| Type | Fan |
| Bearing Type | Sleeve |
| Speed Controller | Yes |
To Next Page