Need help?Do you have a question about the AC Infinity AI-CLT6 and is the answer not in the manual?
General| Model Number | AI-CLT6 |
|---|---|
| Fan Size | 6 inches |
| Material | Plastic |
| Bearing Type | Sleeve Bearing |
| Input Voltage | 120V AC |
| Color | Black |
| Controller Compatibility | Compatible with speed controllers |
| Mounting | Clip-on |
How to adjust fan speed using the single button controller.
Procedure for turning the fan on and off using the controller.
Using the port button to cycle through connected devices.
Cycling through controller modes like OFF, ON, AUTO, TIMER, CYCLE, SCHEDULE.
Accessing settings like DISPLAY, CLOCK, °F/°C, CALIB, TRANS.
Adjusting values and settings using the up and down buttons.
Setting the minimum fan level when the device is off or triggered OFF.
Setting the maximum fan level when the device is on or triggered ON.
Setting the high temperature trigger for AUTO mode activation.
Setting the high humidity trigger for AUTO mode activation.
Setting the low temperature trigger for AUTO mode activation.
Setting the low humidity trigger for AUTO mode activation.
Setting a countdown timer to turn devices ON.
Setting a countdown timer to turn devices OFF.
Adjusting display brightness and auto-dimming.
Locking and unlocking the controller display.
Changing displayed units between Fahrenheit and Celsius.
Adjusting the controller's current clock time.
Adjusting the temperature reading from the sensor probe.
Adjusting the humidity reading from the sensor probe.
Determining the maximum level a device will run at when triggered ON.
Setting a minimum continuous run level for the device.
List of devices compatible with the Controller 69.
Explanation of the 'level' setting for intensity, speed, or brightness.
Troubleshooting why a device may not turn off as programmed.
To Next Page