Need help?Do you have a question about the AC Infinity Airlift Series and is the answer not in the manual?
General| Bearings | Dual Ball Bearings |
|---|---|
| Model | Airlift Series |
| Overall Dimensions | Varies by model |
| Fan Dimensions | Varies by model |
| Airflow | Varies by model |
| Noise Level | Varies by model |
| Rated Current | Varies by model |
| Power Consumption | Varies by model |
| Cable Length | Varies by model |
| Connector | Varies by model |
| Type | Inline Fan |
| Duct Size | 4", 6", 8", 10", 12" (varies by model) |
Recommends mounting location for optimal air circulation and exhaust of heated air.
Guide on measuring the fan frame and marking the wall for cutting.
Instructions on using tools to cut an opening in the wall based on measurements.
Steps for positioning the fan unit in the cut opening and marking mounting holes.
Instructions for securing the fan unit from inside the room using provided hardware.
Guidance on mounting the fan controller near the fan unit.
Connecting the S-Series fan to its speed controller.
Fan activates based on high temperature thresholds, ramping speed as needed.
Fan activates based on low temperature thresholds, slowing down as needed.
Fan activates based on high humidity thresholds, adjusting speed accordingly.
Fan activates based on low humidity thresholds, adjusting speed as required.
Sets a countdown for the fan to turn ON automatically.
Sets a countdown for the fan to turn OFF automatically.
Configures continuous on/off durations for fan cycling.
Sets daily on/off clock-time schedules for automated fan operation.
Sets the threshold for fan speed changes in AUTO mode based on temperature.
Sets the threshold for fan speed changes in AUTO mode based on humidity.
To Next Page