Need help?Do you have a question about the AC Infinity AIRLIFT T14 and is the answer not in the manual?
General| Model | AIRLIFT T14 |
|---|---|
| Fan Size | 14 inches |
| Type | Duct Fan |
| Bearing Type | Dual Ball Bearing |
| Operating Voltage | 120V |
| Voltage | 120V |
| Controller | Included |
| Duct Connector Type | 6-inch Duct Flange |
Features automation controls that activate the fan according to temperature, humidity, timer, and schedules.
Connect the fan's 4-pin Molex connector to the speed controller and plug the fan's power cord into an AC outlet.
Connect the sensor probe to the controller and secure the probe head in the room.
Connect the fan to the controller and plug the fan's power cord into an AC power outlet.
Adjust fan speed from 0-8 using a single button, cycling up with each press, and resetting to 0 from setting 8.
Details OFF, ON, and AUTO modes, including high temperature trigger functionality and fan speed adjustments.
Explains AUTO mode triggers for low temperature and high humidity, detailing fan speed adjustments.
Covers AUTO mode for low humidity triggers and TIMER TO ON for setting a countdown to fan activation.
Details TIMER TO OFF for countdown to deactivation and CYCLE MODE for setting on/off durations.
Sets a daily on/off clock-time schedule for the fan, specifying activation and deactivation speeds.
To Next Page