Need help?Do you have a question about the AC Infinity CLOUDLINE S8 and is the answer not in the manual?
General| Fan Size | 8 inches |
|---|---|
| Airflow | 807 CFM |
| Noise Level | 32 dBA |
| Voltage | 120 V |
| Control Type | PWM |
| Model | CLOUDLINE S8 |
| Type | Inline duct fan |
| Controller | Included |
| Ducting Compatibility | 8 inches |
| Weight | 5.5 lbs |
| Bearings | Dual Ball |
PWM-controlled motor for precise speed, reduced noise, and energy efficiency.
Features automation controls for fan activation based on temperature, humidity, timer, and schedules.
Explains how to use the fan as an intake or exhaust fan for optimal space ventilation.
Steps for securely mounting the controller to a wall using anchors and screws.
Steps for securely mounting the controller to a wall using anchors and screws.
How to control fan speed from 0-10 using the single button controller.
Explains PORT BUTTON, MODE BUTTON, and SETTING BUTTON functions.
Cycling through ports ALL, 1, 2, 3, and 4 to manage devices.
Cycling through programming modes: OFF, ON, AUTO, TIMER, CYCLE, SCHEDULE.
Setting high temperature trigger to activate devices based on temperature thresholds.
Setting low temperature trigger to activate devices based on temperature thresholds.
Setting high humidity trigger to activate devices based on humidity thresholds.
Setting low humidity trigger to activate devices based on humidity thresholds.
Setting a countdown timer to trigger devices to turn ON.
Setting a countdown timer to trigger devices to turn OFF.
Setting on and off durations for devices to cycle continuously.
Setting on and off clock-times for a daily schedule for devices.
Customizing ramp-up levels based on temperature triggers in AUTO MODE.
Customizing ramp-up levels based on humidity triggers in AUTO MODE.
Steps to power on the device and initiate pairing with the AC Infinity app.
Selecting the CONTROLLER 69 from the app to begin the pairing process.
Tapping the DONE button to finalize the pairing process.
Lists compatible AC Infinity devices with UIS connectors and EC-motors.
Troubleshooting why a device may not turn off when programming triggers it.
Troubleshooting why a device may not run or runs at a low level when triggered ON.
How to adjust transition settings to prevent rapid cycling in AUTO MODE.
Setting minimum fan speed by using OFF MODE when not triggered ON.
Clarifies that Controller 69 is only compatible with AC Infinity EC-motor fans.
Steps to fix pairing issues, including toggling Bluetooth and moving the device closer.
To Next Page