Need help?Do you have a question about the AC Infinity CLOUDLINE and is the answer not in the manual?
General| Manufacturer | AC Infinity |
|---|---|
| Category | Fan |
| Series | CLOUDLINE |
| Type | Inline Duct Fan |
| Fan Size | 4 inch, 6 inch, 8 inch, 10 inch, 12 inch |
| Voltage | 120V |
| Control | PWM |
| Duct Compatibility | 4 inch, 6 inch, 8 inch, 10 inch, 12 inch |
| Sizes | 4 inch, 6 inch, 8 inch, 10 inch, 12 inch |
| Features | EC Motor |
| Dimensions | Varies by model (e.g., 4.5 x 4.5 x 6.5 inches for T4, 12.5 x 12.5 x 8.5 inches for T12) |
| Weight | Varies by model (e.g., 2.2 lbs for T4, 8.8 lbs for T12) |
| Controller | Included (some models) |
Features precise speed control, reduced rotor noise, and energy efficiency.
Hydro-mechanical stator blades for efficient airflow in high static pressure.
Enables automation based on temperature, humidity, timer, and schedules.
Sealed inline duct fan rated for resistance to liquids and dust.
Motor contains ball bearings with 67,000 hour lifespan for any mounting direction.
Single button controller with circular display for eight speed settings.
Lists components included with the CLOUDLINE S-Series fans.
Lists components included with the CLOUDLINE T-Series fans.
Lists components common to both S-Series and T-Series fans.
Step-by-step guide for physically mounting the fan unit.
Instructions for hanging the fan using rope clips.
Instructions for hanging the fan using straps.
Guide on how to remove and orient the motor cap.
How to set up the fan for intake or exhaust airflow.
Steps for powering and setting up the S-Series controllers.
Steps for powering and setting up the T-Series controllers.
Adjust fan speed and power on/off using the controller.
Explains OFF, ON, AUTO, TIMER, CYCLE, and SCHEDULE operating modes.
Options for display, units, clock, calibration, and transitions.
Details controller alert icons and specific alarm types.
Covers resetting the controller and locking its functions.
Functions for hiding the screen and adjusting settings automatically.
Interface for adjusting controller modes and parameters via the app.
Setting up automated activations, alarms, and notifications.
View historical temperature and humidity data.
Logs all controller activity, programming, alarms, and notifications.
Options to name the device and change temperature units.
Adjusts screen brightness and calibrates sensor readings.
To Next Page