AC Infinity IONBEAM U4 - Other Settings; System Reset Options; Controller Lock and Screen Hide

27
OTHER SETTINGS
RESET TO OFF/DEFAULT
Holding the up and down buttons together for 2 seconds will
reset the value of your current mode to its default setting. In
SCHEDULE mode, pressing the up or down button after resetting
will return it to its previous value.
HOLD
+
HOLD
+
FACTORY RESET
Holding the mode and up/down buttons together for 5 seconds
will reset your controller and restore factory settings. This will
clear all user set parameters of each controller mode and setting.
CONTROLLER LOCK
Holding the mode button will lock the controller in your current
mode. While your controller is locked, no parameters may be
adjusted nor will you be able to switch modes. Holding the mode
button again will unlock the controller.
HOLD
+
HIDE SCREEN
Lock the controller so no settings can be adjusted. See above.
Then press the mode button to turn the display off. Pressing the
mode button again will turn the display back on. Programs will
still run in the background while the LCD screen is off.
PRESS
+