5
1 Your New System
Using the Meter Buttons
When instructed to press a meter button, press it briefly and release it.
When instructed to press and hold a meter button, press and hold it for 2 or more seconds.
Button Functions
Button / Action Function
Press
to
turn the meter on and retrieve stored test
results
mark the test result after a test
change settings
retrieve the previous stored test result
change from the earliest stored test result to
the averages
retrieve the previous average
Press to
turn the meter on and access settings
mark the test result after a test
go to the next setting
retrieve the next stored test result
change from the averages to the stored test
results
retrieve the next average
Press and at the same time
to
perform a display check
save settings after the final screen is shown
and turn the meter off
turn the meter off
Press or to
turn the test reminder beep off
FOM_09262946001_01_EN_ROW.indd 5 24.03.2020 09:47:26
To Next Page
Loading...
Need help?
General
