7. The minutes flash. Press
and release
or
to select 00, 15, 30, or
45. These are the only
choices.
8. Press and release
to confirm the minutes.
“Am” or “pm” flashes
on the display. Press
and release
or
to switch between “am”
and “pm.” Press and
release
to confirm
“am” or “pm.”
9. “Set-up,” "OFF,” and the
bell symbol appear on
the display with the next
alarm (“A-2”) flashing.
You can either set a
second alarm or press
and hold
until you
see the flashing test strip
symbol to exit the set-up
mode.
44
43604_NanoAv_12hr_Ins_EN.indd 44 11/24/08 11:08:43 AM
To Next Page
Loading...
Need help?
General
