5. If you choose to set the hypo indicator to
“On,” “set-up” appears and
flashes.
The display shows 3.9 mmol/L.
6. Press and release
or to select the
level you want. Press and release
to
confirm it.
7. Press and hold
until you see the
flashing test strip symbol to exit the
set-up mode.
This function is no substitute for hypoglycemia training by your
healthcare professional.
47
43604_NanoAv_12hr_Ins_EN.indd 47 11/24/08 11:08:44 AM
To Next Page
Loading...
