Notes:
The meter uses two 3-volt lithium batteries, type 2032. This type of battery can be •
found in many stores. It is a good idea to have spare batteries available.
Be sure the batteries are inserted • (+) side facing down or facing away from you.
After you change the batteries, the meter prompts you to confirm the meter’s time •
and date settings. All test results are saved in memory.
Always replace both batteries at the same time and with the same brand.•
60
43604_NanoAv_12hr_Ins_EN.indd 60 11/24/08 11:08:48 AM
To Next Page
Loading...
